 HomeNewsThe working principle of automatic screw locking machine

The working principle of automatic screw locking machine

2022-10-25

Although many people are familiar with automatic type screw locking machines, they do not understand how automatic screw locking machines work. So, what is the working principle of Automatic Screw Locking Machine? Let's take a look below.

With the rapid development of industry, automatic screw locking machine has gradually replaced manual screw locking, which has greatly improved the production efficiency and saved labor cost. Now, many enterprises have completed the fully automatic production. The whole production plant is praised by many enterprises as long as they adopt advanced high-speed running machinery and equipment. Continuous learning and introduction of new equipment is the key to continuous innovation and development of enterprises.

Automatic screw locking machine is an automatic device that realizes screw feeding, hole alignment and tightening through the synergistic work of motor, position sensor and other components, and also realizes the detection of screw locking results according to torque tester, position sensor and other devices. The working principle of automatic screw locking machine is mainly done by feeding, locking and placing. The specific process is as follows.

Feeding: Choose the feeding method of roller, hook screw, turbine, vibrating plate, etc. The screws of vibrating guide will be arranged in order and conveyed to the screw distribution system, and then the distributed screws will be sent to the locking nozzle below.

Lock and Pay: The electric batch moves up and down and left and right in the table space. The spindle has upper and lower limiters. Move the drill nozzle to the top of the screw hole and fix the restrictor to ensure the drill does not touch and scratch the product. After the screw hole is aligned, the machine drives the electric drill to press down. The electric drill has a downward pressure function. The screw makes contact with the screw hole and the electric batch is actively activated to finish locking. At the end of locking, the electric batch will stop rolling. The machine will lift the electric batch and the screw will be delivered to the batch nozzle. The automatic screw locking machine will move the electric screwdriver to the next screw hole in order to lock the screw continuously.

Worker operation: The worker places the product on the fixture, waits for the machine and equipment to lock the product, replaces the product, then places it as a locked product and continues the same operation. This screw locking machine is easy to operate, convenient, time-saving and labor-saving, which can save manpower and improve the efficiency of locking work stations in enterprises.

The above is the working principle of automatic screw locking machine, in the use of the process, a good grasp of the working principle of the screw machine can better give full play to the use of automatic screw locking.

Previous: What steps are included in the customization of non-standard automation equipment?

Next: Singsun imported PLM(Product lifecycle Management ) system to accelerate the process of standardization and paperless management of product development